Centura

Centura Spares

Centura Hydraulics


From Australian Truck and Auto Parts (ATAP):

FRONT

Brake Master Cyl Minor Kit - K7580X

Brake Calliper Major Kit - K1668S

Brake Calliper Minor Kit  - K698S

Brake Calliper Piston - DB2347

Brake Hose Front - H1169

REAR

Cylinder Assembly (6Cyl) 25.4mm -  P6354

Cylinder Assembly (4Cyl)  22.2mm - P10372

Cylinder Minor Kit 25.4mm - K833S

Cylinder Minor Kit 22.2mm - K357S

Hose Rear - H1094

* Use a 22.2mm Cyl form Toyotal Corona 1981 if brake proportioning valve is removed. Industry part no JB2233.

CLUTCH

Master Cyl Minor Kit Early (Girling) - K7577X

Master Cyl Minor Kit Late (PBR) - K7212X

Slave Cyl Repair Kit Early - K873S

Slave Cyl Repair Kit Late - K834S

*Recommend stainless steel re-sleeving of clutch cylinders

The Girling type is best avoided as the seals wear out quicker due to the design.

Centura Suspension/Steering

Shock Absorbers Rear - Gabriel Ultra 69610, Gabriel Guardian 81416

Sachs 311 524

Shock Absorbers Front - Monroe MR930 (only recommended for the 4Cyl)

 Use heavy duty Front shock inserts from Toyota Corona 1981 on 6Cyl models (minor mod required)

                                          - Gabriel Ultra  strut insert G44926

                                           - KYB365076

                                           -Pedders

Note: Do not discard the gland nut from the top of the strut tube, as it will need to be re-used. The nut supplied with the strut-insert kit will not fit!

Ball Joint-Lower Control Arm to Strut:  BJ119 or BJ56

Ball Joint-Outer Tie Rod End: TE474L

Wheel Seals:

4-Stud:461222N 

Same as W23718725 R21

1.875"X2.375"X0.250" -

5-stud:460016N

1.857"X2.328"X0.433" - 47.2x59.4x10.6mm

Spindle Nut M16x1.5 right-handed thread. (Same as early Ford Laser/Meteor Festiva LH rear 88-91, Mazda 323 rear, Suzuki Swift 94-2000, Peugeot 404,505) Kelpro AXN-02, Nice NN-048, NN48-2

Engine

4 Cylinder type 7T2

Air Filter 4Cyl  - Ryco A272

Oil Filter - Ryco Z96

Spark Plug 4Cyl - Champion N7YC

                              - Bosch

                              - NGK BP6ES

Leads:  4Cyl - Bosch

B84Ri, B84Ri, B72Ri, B56Ri, 

Distributor Cap - (Ducellier) Bosch GD702

Distributor Cap - (SEV Marchal) SEV 4016

                                                    CI D173

                                                   Intermotor 4623, 46230

Distributor Rotor - (Ducellier) Bosch GD799

6 Cylinder Hemi

Air Filter 6Cyl - Ryco A273

Oil Filter - Ryco Z96(M16x1.5) Z9 (with adapter) note Z96 is the metric version of Z9(3/4UNF)

Spark Plug 6Cyl - Champion N11YC

                               - Bosch

                              - NGK BP5ES

Distributor Cap - Bosch GB539

Distributor Rotor - Bosch GB502

Contact set(non-electronic ign) - Bosch GB534

Leads 6 Cyl

Valve Stem Seals: HR229

Cooling System

Radiator mounts: Use Commodore VN lower Holden P/No 02892009

Driveline

Universal joints:

4Cyl

Rear Universal Joint: Centura: K5-L4R - Confirmed for Australian models. Size:26.99x74.61

Same as Ford Transit, Austin 1800, Fiat 130, Holden Frontera, Landrover I&II, Triumph TR4, TR5, TR6, Stag, 2000, 2500, Volvo 240, 740, 760

Rear Universal Joint K5-LGB80R**      Size: 23.80x61.30 (Also Front on Auto)

**This is reported as suiting European models (Chrysler/Simca/Talbot) but you will need to verify this by measurement.

same as Cortina Mk1,Mk2 Fiat124,125,131,132, Holden Jackeroo 77-88 (front), Rodeo 75-88, Shuttle, Torana HB, MG(many), Triumph Dolomite, Spitfire, TR7, Volvo240


6Cyl

All - (Hardy Spicer) RUJ-2038R         Size: 27.39x54.00 (Circlips inside yoke)

same as Valiant, Ford Cortina 6Cyl, Fairlane, Falcon, Holden Commodore VN on, Leyland P76,Nissan Skyline 88-91


Make a free website with Yola